Lighting Fixtures, Light Fixtures and Lighting Parts
Lighting Fixtures and Parts are electrical devices used to create artificial light or illumination in houses and buildings. Lighting fixtures are classified as indoor lighting fixtures or outdoor lighting fixtures. A complete lighting fixture unit consists of the light source or lamp, the light reflector for directing the light, an aperture (with or without a lens), the outer shell or housing for lamp alignment and protection, an electrical ballast, if required, and connection to a power source. A wide variety of special light fixtures are created for use in the automotive lighting industry, aerospace lighting, marine lighting and medical lighting.
Lighting Fixtures Aluminum Part Prices.
Lighting Parts Die Casting Pictures.
Lighting Fixture types
Free-standing lighting fixtures or portable - table lighting fixtures and office task lights.
Recessed light fixture - the protective housing is concealed behind a ceiling or wall, leaving only the lighting fixture itself exposed. The ceiling-mounted version is often called a "downlight".
"Downlight Cans" a variety of lamps - this term is jargon for inexpensive downlighting products that are recessed into the ceiling. The name comes from the shape of the lighting fixture housing.
Troffer lighting fixture - recessed fluorescent lights (the word comes from the combination of trough & coffer)
Surface-mounted light - the finished light fixture housing is exposed; not "flush" with surface
Sconce lighting fixture - provide up or down lights; can be used to illuminate artwork, architectural details; commonly used in hallways and/or as an alternative to overhead lighting.
Indirect lighting - light reflects off the ceiling for general illumination
Cove light - lighting fixture recessed into the ceiling in a long box against a wall
Track light fixture - individual fixtures (track "heads") can be positioned anywhere along the track, which provides electric power.
Under-cabinet lighting fixture - mounted below kitchen wall cabinets
Outdoor lighting - lighting fixtures used to illuminate walkways, parking lots, roadways, building exteriors, landscape and architectural details.
Outdoor light Pole or stantion mounted - for landscape, roadways, and parking lot lighting fixtures
Pathway lighting fixtures - typically mounted in the ground at low levels for illuminating walkways
Outdoor Bollards - A type of architectural outdoor lighting fixture that is a short, upright ground-mounted unit typically used to provide cutoff type illumination for egress lighting, to light walkways, steps, or other pathways
industrial lights - often long lines of fluorescent lamps used in a warehouse or factory
Emergency lighting or Exit light - connected to a battery or to an electric circuit that has backup power if the main power fails
________________________________________
Where Aluminum Lighting fixtures Are Used
Medical offices use hanging light fixtures.
Parking garage lighting fixture housings.
Bullet light fixture.
Street traffic light housings.
Walk light housings.
High temperature light housings.
Outdoor coach lights.
Wall sconce fixtures.
|
